Troubleshooting Your New Airsoft Gun - Part 2

You may notice that you new airsoft gun is notimmediately read the manual! Improper assembley
shooting coorectly. This may be due to improperof your gun may cause serious and permanant
hop-up setup. Many times users fail to set thedamage. I understand that when your gun is
hop-up. The hop-up controls how much spin is ondelivered you are extremely excited. Please open
the BB. When it is set to full, the bb should arc upthe manual and carefully read the directions.
or possibly not even feed. When it is set too low,Every once and a while your trigger may get
the BB will drop quickly. To set your hop-up, turnstuck on semi-automatic and not pull back. Do not
it all the way down and shoot it. Slowly increase ittry to force the trigger to move. This may cause
until you find the desired trajectory.permanent damage. Simply place your gun on full
It is important to clean and lubricate your newautomatic and fire a few rounds. Switch it back to
airsoft gun. Even though it is new, it may still besemi and shoot. This should have fixed the
dirty and unlubed. Never used a petroleum basedproblem.
lube. The only lube you should ever use is siliconeHopefully these tips will help you out and keep
based. Do not use too much lube as it can holdyour airsoft gun working properly. Remember to
dust and dirt. Use your cleaning rod and cloth onkeep up on your maintenance regularly so that
the gun before lubrication. Spray lube in the barrel,you can get many good years of performance.
magazine well, hinged parts and bb feeder. CleanYou need to take care of your gun as it is a large
and lube your gun every 5000 rounds. Alwaysinvestment.
lube a gun that hasn't been used for awhile.Check out all the great airsoft guns and gear at
When you get you new airsoft gun, be sure toAirsoftEverything.